INTRODUCTION:

Smart water detector with built-in siren, detects the presence of water, and displays the status on the YoLink app
Note: For water detection, only, without an integral siren, consider our original Water Leak Sensor

REQUIREMENTS:

YoLink Hub(Included) with internet connection (wired Ethernet or 2.4GHz Wi-Fi).
Smartphone or tablet running iOS 9 or higher, Android 4.4 or higher

TECHNICAL SPECS:

Power: 2 AAA batteries (3V DC)
Dimension [L x W x D]: 2.44 x 2.44 x 0.80 inches (83.06 x 30.99 x 14.99 mm)
Cable Sensor: 4.2 feet (1.2 meters), can be extended to 10 feet
Operating Temperature Range: 32°F – 122°F (0°C – 50°C)
Operating Humidity Range: ≤95%RH non-condensing
Intended for indoor use only

APPLICATIONS:

Place the YoLink Water Leak Sensor 2 anywhere that is at risk of high moisture or water, due to leaks or flooding
Use the YoLink smartphone app to remotely monitor the status of your water leak sensors in your home, rental property, condo, summer home or business (internet connection and YoLink Hub required)
YoLink’s industry-leading long range communication allows for placing the sensor in your barns, separate garage building, greenhouse, etc.
Some common applications include:
Locations at or below grade, subject to water incursion
Basement floors
Near sump pumps
Under sinks
Next to toilets
Under or near laundry machines
Under dishwashers
Under refrigerators & ice machines
Under fish tanks/aquariums
Inside hot tubs*
*Refer to device environmental limitations in Technical Specs, above. Use this device outside the recommended ranges at your own risk; warranty may be voided, etc.
STATE-OF-THE-ART Smart Water Leak Detection: LoRa-based 1/4 mile open-air range, 2+ year battery life, no dependence on WiFi, device-to-device pairing provides functionality even with the loss of AC and/or internet!
ROPE STYLE water-sensing cable, 4.2 feet (1.2 meter) long, additional cables can be added, for detection in confined spaces, such as under a dishwasher, and for defining specific detection areas, such as encircling a water heater
THAT WAS EASY! Installs quickly and easily, thanks to Scan & Play QR-code scanner feature in the app, easy wall-mounting, and no requirement to plug the sensor into an AC outlet.
NO WIFI, NO INTERNET, NO POWER? NO PROBLEM! Our patented Control-D2D device-to-device pairing, over our LoRa-based wireless network, allows for devices to be paired to each other, in such a way they will continue to operate, even if WiFi is flaky, the internet goes down, or the AC power goes out!