Price: $3.99 (as of Nov 16,2025 12:21:20 UTC – Details)
Buy Now
To calculate the overall star rating and percentage breakdown by star, we don’t use a simple average. Instead, our system considers things like how recent a review is and if the reviewer bought the item on Amazon. It also analyzed reviews to verify trustworthiness.Learn more how customers reviews work on Amazon
Customers say
Customers find the VR cable management system well-built and easy to set up, with one customer completing installation in about 15 minutes. The product effectively keeps cables off the floor, is super quiet, and customers consider it worth the price. The adhesive strength and tension receive mixed feedback – while some say it sticks well to the ceiling, others advise against using the adhesive pads, and while some appreciate the tension, others find it too high.
Customers find the VR cable management system to be well-built, with one customer noting that the pulleys have held up well over time.
"Great product, had it for a few years. The hooks that screw in the wall are great! the pulleys are quiet and have lasted me years…." Read more
"Great quality and materials. Stuck to our textured ceiling and it is staying so far." Read more
"…Long story short its a good product with high quality parts, very sticky adhesive, quiet when moving the only reasons why you may reconsider is if…" Read more
"Well though out solution to a messy problem. Kit is well made, easy to use and effective." Read more
Customers find that the VR cable management system works excellently, with one customer noting it functions well even near ceiling fans.
"Works great, takes sometime to find the right tension points. I wish it was easier to reset from standing to seated play without too much overhang…." Read more
"…It works well and keeps my fragile Index cable out of harms way but the rubber isn't good at catching the cable and often leads to it sliding more…" Read more
"…sessions over several months, I can say these are convenient and work great. They are easy set up and are built quite well…." Read more
"Works perfectly, the adhesive hooks will damage your ceiling if you remove it but if you don't plan on moving your set up or if you use the screw in…" Read more
77 customers mention "Ease of setup"73 positive4 negative
Customers find the VR cable management system easy to set up, with one customer completing installation in about 15 minutes.
"This is easy to install, straightforward, and will give you nearly unrestricted freedom of movement if you're using your VR headset wired to your…" Read more
"Easy to setup, works great. No more getting wrapped up in my own twisted cable." Read more
"…Setup was very easy, and it was awesome to know that I had multiple types of setups available, based on the positioning of the anchors in order to…" Read more
Customers appreciate the cable management system's ability to keep wires off the floor and out of the way.
"Definitely keeps the cable out of the way and it quiet which I guess is good, but my biggest gripe is there is too much tension…." Read more
"…I can walk around, turn 360, duck to the ground, etc. and the cable is never in my way.. This product is an absolute must for any VR player using a…" Read more
"This kit comes with everything you need. Having the cables off the floor (and with minimal tension from above) really helps with immersion … the…" Read more
"…The wire – steel vs dyneema: The pro version has a dyneema wire, which is stronger than steel, more flexible, cannot rust, cannot weaken from…" Read more
Customers appreciate that the VR cable management system is super quiet, with multiple customers noting the silence of the cable pulleys.
"Works, quiet, way better VR experience with these things. Only needed 3 but in a larger room the setup in the video reviews would work great." Read more
"…No D clips or rubber bands. They are silent and prevents the chord from wrapping like the old pulley system. Easy to use and install." Read more
"…I'm not disappointed, very quiet and really good. Even came with a hook ring to setup a 3-1 suspension system. Great job Kiwi team…." Read more
"…I just love this product even more, it's super quiet and it works awesome, this is a MUST HAVE PRODUCT for any cable VR headset, I totally recommend…" Read more
59 customers mention "Value for money"53 positive6 negative
Customers find the VR cable management system worth the price.
"…Other than what I have stated, I can say they are worth the money if you are tired of your tether dragging on the ground." Read more
"…Haven't tripped over a cable once since setting this up. This is a great value considering the costly damage that can come from stepping on or…" Read more
"…Despite this horrible experience, the product itself is well worth the money and is very useful as a pulley system…." Read more
"This pro version is worth it, older versions of steel wire would break so easily, i had to replace it multiple time…." Read more
Customers have mixed experiences with the VR cable management system's adhesive strength, with some finding it well stuck on and perfectly adhering to the ceiling, while others report that it loses its stickiness over time and do not recommend using the adhesive pads.
"…These devices make that easy. I mean easy. They have sticky hooks, that stay on tight, with not one coming off in more than a month now of daily use…." Read more
"Works perfectly, the adhesive hooks will damage your ceiling if you remove it but if you don't plan on moving your set up or if you use the screw in…" Read more
"…the adhesive is strong. the retractors are good quality, they extend 4-5 ish feet without too much of a pull back…." Read more
"…Pros Strong adhesive for secure cable management Flexible placement on walls and ceilings…" Read more
Customers have mixed opinions about the VR cable management system's tension, with some finding it excellent while others report that the pulleys do not have sufficient tension.
"They hold wires up and out of the way. Good tension." Read more
"Works great, takes sometime to find the right tension points. I wish it was easier to reset from standing to seated play without too much overhang…." Read more
"…The hooks are nice and sticky and comes with extras. The supports give just enough pull to hold your cable in the air without pulling it all the way…" Read more
This is a well thought out product made with good materials. It's just so good. You can tell that someone was thinking about the functionality with tension and extension in mind when designing it. The value for the money is incredible. What a vibe!
I recently tried the Kiwi 6-pack cable management clips for managing my computer cable to my vr, and here’s my detailed take on them.
Setup & Installation
The kit comes with six clips and even includes an extra one. I used them primarily to hold and slack cables from my PC to a VR headset (specifically a heavy cable for the Pimax Crystal). Installation is straightforward: these clips stick firmly to both walls and ceilings, making it possible to route cables neatly across rooms or tricky angles.
Performance
One of the things I liked is how versatile they are. Even when doubling up a clip to reach a distant corner, the cable can easily extend across an entire room. In my test, it reached from one end of the room to a corner with no issues, and it didn’t interfere with ceiling fans at all. The clips hold heavy cables well—something to keep in mind, because this is a high-tension scenario.
Even with slacking for extra length, the clips maintain a strong hold. I’m over six feet tall, and with the cable routed about a foot above my head, the clips still kept everything secure without sagging or losing adhesion.
Cautions / Considerations
The adhesive is extremely strong, so removing the clips can be tricky if you want to reposition them.
You can’t “yank” the cable out once it’s in; the clips are meant to hold cables firmly in place.
If you plan to run cables near fans or other obstacles, testing first is recommended, but in my experience, it worked fine even near ceiling fans.
Pros
Strong adhesive for secure cable management Flexible placement on walls and ceilings Can hold heavy cables without sagging Extra clip in the kit is a nice bonus Works across longer distances than expected
Cons Hard to remove once applied Not designed for frequent cable removal or adjustment Cable must be carefully placed; can’t just yank it out
Overall The Kiwi cable clips are highly effective for permanent or semi-permanent cable routing, especially for heavy or long cables. They are strong, versatile, and ideal for neat setups across walls and ceilings. Just be cautious when removing them or repositioning—they’re meant to stay put once installed.
Rating: ★★★★★(5/5) — Very strong, reliable clips, but limited if you need frequent adjustments (why would you, there ment for a permanent vr setup)
On a side note they can fit any cable size, thin small or multiple huge ones, the end is rubber that holds the cable and can stretch alot, it also has 3 different cliping sizes like a belt.
I had previously bought the $20 VR Cable Management from KIWI, and I'm replacing them for multiple reasons, which the pro version has improvements for:
The wire – steel vs dyneema: The pro version has a dyneema wire, which is stronger than steel, more flexible, cannot rust, cannot weaken from bending, cannot weaken from twisting. These are all problems that I experienced with the thin steel wire, which broke after 150-200 hours of use, and I'm confident the dyneema will handle constant movement and bending far better than steel.
The cable holder – silicone strap vs rubber o-ring: The pro version has a plastic cable holder with a silicone strap to buckle the cable in. On the standard version, they give you a rubber o-ring, which you wrap around your cable, and attach to a tiny metal clip with sharp edges. The metal clip wears into the o-rings and causes them to break. On the pro version, the silicone strap is far thicker than the o-ring, and is held straight by the plastic buckle, so it cannot twist or wear down.
The wall attachment is identical to the standard version, which is fine. It worked well for me in the past, and I don't mind that nothing changed. Though the standard version also used the metal clips and o-ring to attach to the wall. The pro version has a silicone loop built into the reels, which again, is much better because the o-rings can break.
The overall construction is also much nicer. The reel is a custom plastic mold for the brand with a higher quality plastic, as opposed to the standard version, which looks and feels like a generic part, made with cheap materials. The higher quality materials do make the pro version quieter than the standard version, but I would not call it silent. There is still the sound of the the reel (think of how a retractable badge, or key holder sounds).
I look forward to using the pro version of this product for a long time, and I would recommend anyone considering the standard version to upgrade. The standard version will work ok, but it will wear down after a while.
So, it works as advertised and I love it. Makes it very easy to play games without a wire interrupting you. Here is the downside: you will feel a tug when you move too far from center.
Depending on how you set it up, you can mitigate this pretty well, but the fact is, you will always feel it. I got this along with a few friends. We all prefer having our set up this way, however, for one of my friends it’s a close call.
I think it’s great for games where you are consistently turning, and especially for games where you are sitting down. When you are sitting, if you set it up correctly, there is no tug and no wire going down your shoulder or back. When you are standing, and moving around to bend over, etc… you will feel a tug. Again, it can be mitigated, but only to a certain extent.
Ultimately, you have to ask yourself whether you prefer feeling a cable going down your side, or a tugging when walking too far.
I have a small play area so the tug is a helpful reminder that I am almost out of my play area. It is a plus for me, but perhaps, you might not feel the same way if you have an extremely large room.
Also, it’s extremely easy to take down and put back up (after you have initially set it up) if you need the area to look cleaner when you have guests.
Lastly, and this is more of a tip: depending on what game I’m playing, I do a lot of turning in the same direction. This can lead to the wire twisting significantly. I learned to provide some slack on the loops closest to me so the cable is free to turn as needed. After, I play this game, I usually disconnect my link cable and ensure that it is not under tension. Personally, I prefer having to do this than having the cable dangling by my side when playing, or having to be aware of its presence and having to account for stepping over it when playing.
Das Kabelmanagement hält was es verspricht. Nachdem alles richtig eingestellt ist, merkt man gar nicht, dass die Brille ein Kabel hat. Das auf und abrollen funktioniert einwandfrei und ist leise. Außerdem sind Schraubharken,Dübel und die Möglichkeit Harken mit Klebestickern zu nutzen dem Paket beigefügt.
Es gibt nichts schlimmeres, als während einer hitzigen Runde auf einmal in seinem Kabel verknotet zu sein und im schlimmsten Fall dieses durchreißt.
Die 6 Pulleys kann man entweder per Schraubhaken oder (sehr klebrigen) Pads an der Decke anbringen. Ich empfehle eine Montage in Dreiecksformation mit insgesamt 4 Pulleys + Metallring (siehe Bild). Spiele damit ziemlich angenehm mit meiner Rift S auf 3x3m Fläche.
Die Pulleys sind leise und ziehen sehr gleichmäßig ohne zu sehr am VR-Headset zu ziehen. Habe noch mit meinem 3D-Drucker eine Kabelhalterung für den Hinterkopf gemacht. Wenn es mal zieht, dann wenigstens nicht schräg links.
Es gibt nichts schlimmeres, als während einer hitzigen Runde auf einmal in seinem Kabel verknotet zu sein und im schlimmsten Fall dieses durchreißt.
Die 6 Pulleys kann man entweder per Schraubhaken oder (sehr klebrigen) Pads an der Decke anbringen. Ich empfehle eine Montage in Dreiecksformation mit insgesamt 4 Pulleys + Metallring (siehe Bild). Spiele damit ziemlich angenehm mit meiner Rift S auf 3x3m Fläche.
Die Pulleys sind leise und ziehen sehr gleichmäßig ohne zu sehr am VR-Headset zu ziehen. Habe noch mit meinem 3D-Drucker eine Kabelhalterung für den Hinterkopf gemacht. Wenn es mal zieht, dann wenigstens nicht schräg links.
Excelente calidad y las opciones de montaje son muy buenas. Use el aro incluido para hacer una polea triple y en verdad mejora el uso del VR al no sentir el cable al moverse. Puedes agacharte y mover sin la sensación de tropezar. También se desmonta fácilmente por si no puedes dejar permanente tu VR.
The product is a worthwhile investment. For a wired VR headset, this accessory is essential; while I find the pricing somewhat excessive, the superior comfort justifies the cost. There is no comparable alternative currently available.
The product is a worthwhile investment. For a wired VR headset, this accessory is essential; while I find the pricing somewhat excessive, the superior comfort justifies the cost. There is no comparable alternative currently available.
Use la parte de pegamento para pegarlo al techo y funcionan muy bien llevo unos 5 meses con ellos y no rompen para nada la inmersión tanto que ni se siente que esta el cable conectado pero para eso tienes que ajustar bien el limitador que viene para que no tengas que estirarlo mucho y se sienta bien
Product Summary: KIWI design VR Cable Management, 6 Packs VR Pulley System Compatible with Quest 3S/3/2/1/Pico/PSVR/PSVR2
From KIWI design Free to Move, Play Impressively- This VR pulley system dramatically reduces the cable’s presence and lets you freely move around your playspace without the worry of yanking your cable or headset. Makes every game so much more fun on PC and avoids the cord dangle on the back or the tripping Hazard or getting tangled. Quieter VR Pulley System- The whole VR Cable Management System adopts silicone, ABS, and rubber materials and noise dampener technology to maximize silence and minimize cable tug during use, making it easier to get fully immersed without noise around and tripping over cables. Our pulley system must be a good option for any VR player using a wired set. Simpler Yet Smarter Design – We simplify this cable management system from noise-free integrated design of the top soft loop and pulley body to 360° rotations function integrated inside the HMD cable holder, make it is easy to assemble and disassemble and adapts to different types of cable to fix them without slipping over the cable. Two Ways to Install – Easy to set up, you can choose adhesive hooks or screw hooks, depends on whether you want it to permanent or not and what kind of ceiling you have. The tension of the retractable wire is moderate and can extend up to 61 inches long then rebound automatically, gives you a more comfortable VR experience. Broad Compatibility – The VR accessories is perfect and must have compatible with Quest 3S/ Quest 3/2/1/Pro, PSVR2, Pico and other wired virtual reality headsets, the HMD cable holder is made of soft elastic rubber so no worry about damaging your cables.
Report