Price: null - $4,799.00
(as of Sep 11,2026 20:11:07 UTC – Details)

The following are important notes: During lawn mowing, if you hit a hard object, stop the machine immediately and check the bottom blades for damage or looseness. Ensure both blades are the same size; if any are faulty, tighten or replace them immediately! The entire cutter head is straight; if bent, adjust or replace it immediately. After each use, tighten all machine screws, paying particular attention to the blades and center shaft screws (the center shaft screw must be removed, fitted with threadlocker, and then tightened). For normal engine operation, ensure both blades are undamaged. If damaged, immediately shut off the engine and replace the blade. If a blade breaks, starting the engine will cause imbalance, excessive vibration, and potential muffler damage. If the blade hits a hard object, immediately shut off the engine and check the integrity of the blade assembly. The blades are sharp; please exercise caution during installation. Blade Screws with a strength of 8.8 or higher are required. Due to the threads on the blade holder, tighten the nuts to ensure blade rotation. The same applies to screws; replace worn or deformed screws promptly to prevent accidental injury. Wear is normal due to the lawnmower blades contacting the ground at high speeds; always replace worn parts immediately. Engine Center Shaft Screws,Check promptly if hit by a hard object or if the screw is loose. Center shaft screws are imperial standard screws and are not standard screws. Disassembly is the same as regular screws (straight thread). Before installation, apply a drop of high-strength threadlocker to the screw for better results. Please pay close attention to the machine's safe operating procedures. Construction machinery inherently carries risks; never neglect these procedures. Strictly emphasize that no one is allowed to stand directly in front of or behind the machine while it is in use!
This lawnmower boasts powerful performance and excellent hill-climbing capabilities. Equipped with a 22-horsepower Loncin engine and a tracked walking structure, it can climb a maximum angle of 65°, ensuring stable operation on steep mountains and slopes.
This lawnmower is equipped with remote intelligent control, supporting remote control up to 1968ft, and the cutting table height can be remotely adjusted (0-7.87 inches). The operation mode is safe and convenient.
With a 35.43-inch wide cutting width and two flat blades, it offers high cutting efficiency and is suitable for various scenarios including lawns and weeds.
This lawnmower has undergone a new safety upgrade, featuring a crash barrier and a timer to enhance its impact resistance and manage operating time, extending its service life.
This lawnmower is stable and durable, driven by a brushless motor, with electric start. It uses 87-octane or higher gasoline, and its robust construction makes it suitable for extended outdoor operation.