Due to a mistake by our packaging staff, the wrong size of hex wrench was put in, so if you encounter this problem during installation, please contact us as we don’t sell hex wrenches separately in our store, and we will make a partial refund for you!
Please watch our video before installing. 3D Printer Must Have Tool: The heat press is composed of aluminum metal parts. The structure is stable and lightweight. The product is unassembled, you only need to spend about 10 minutes to assemble it (please follow our video or the instructions included)
Soldering iron: Power 110v60w, Min Temperature 180℃/356°F, Max Temperature 500℃/932°F. Highly durable, Not prone to oxidation, heating up fast but controlled. It is equipped with ceramic heating element with intelligent thermostatic control. The heating will stop automatically when the set temperature is reached. We have designed three sizes of soldering iron holders to fit our products as well as most of the soldering irons on the market, such as: FX-888D
Equipped with 240Pcs Female Knurled Nuts: In this kit, you will receive 240Pcs M3 female knurled nuts, 120Pcs M3x5xH4 and 120 Pcs M3x5xH6 for mounting your many 3D printing accessories.
Hot Nut Press Head Kit: Interchangeable with standard 936 general-purpose soldering iron tips, often used in 3D Printer like Voro2.4 0.2 series project prints hot-melt copper nuts or implants nuts on plastic.A variety of connectors, which can realize the embedding of various M2 (M2.5 common) M3 M4 M5 M6 (1/4″) M8 hot melt nuts. Brass made, good heat conduction, end-face contact, prevents the nut from skewing, and is convenient and quick to embed the nut into the plastic part. Female-male head design, hand-twist knurled joints, you can disassemble the head joints at any time in the cooling state to replace different types of threaded indenters.
NOTE: (1) The maximum spring travel is 55 mm/ 2.16 inches, do not exceed this limit for a long time! (2) If you need to increase the extra height, we will sell longer profiles and springs with longer stroke as spare kit in future. (3) Due to the many shapes of the prints, it is not possible for us to design standard centering at the bottom, if you have problems with this, please feel free to contact us and we will provide a solution.